Go to the Home Page - IECI Logo

Interworld Electronics

 
and Computer Industries Inc.         
Interworld Electronics Home Page
  Your ALT-Text here Home   Your ALT-Text here Data Acquisition   Your ALT-Text here Quatech   Your ALT-Text here SPP-100
Communications
Selection Guide
Industrial I/O
PCMCIA
Software
Miscellaneous
FTP Site
Tech Question
Request a Quote
Press Releases
SPP-100 Lisalogo.gif (1748 bytes)

Single Channel Parallel Port/EPP Card
 Quatech SPP-100
BUY
US Prices
CDN Prices

Privacy and Security
 
  Features
 
The ONLY parallel PCMCIA card which fully supports IEEE 1284 bidirectional EPP Interface Standard
Performs in EPP mode under Windows 95
IBM PC Parallel Port Compatible
Software configurable base address
PCMCIA card standard specification 2.1 compliant
Client software driver for DOS & OS/2
Selectable & shareable interrupt (IRQ 3-7, 9-12, 14, 15)
Memory only interface supported
Automatic configuration at next available LPT port
HP Palmtop drivers available upon request

Description

Quatech's SPP-100 is a PC-Card 2.1 compliant Type-II PCMCIA card which adds an IEEE-1284 compatible parallel port to the host computer. The SPP-100 is the only parallel PCMCIA card on the market which fully supports the IEEE 1284 EPP standard. AS well as EPP mode, the SPP-100 can also function in PC compatible and bi-directional modes. The card includes an interface cable which provides a standard 25-pin female connector output.

The SPP-100 will be assigned to the lowest LPT port available by default. However, users may select the particular LPT port to which the SPP-100 is assigned. In addition, users may specify any base address and interrupt level for the SPP-100.

All necessary software is included to install and configure the SPP-100 for use with DOS/Windows 3.x and OS/2. The SPP-100 is also compatible with Windows 95. Upon request, special software drivers are included for HP Palmtop users.

Suggested Applications

• Interface to printers and plotters
• Bidirectional interface to peripherals that support the IEEE 1284 Interface
• Portable data acquisition
• Interface to external tape drives and hard disks

Specifications

Bus Interface: PCMCIA Card Standard 2.1
Physical Dimensions: Type II (5 mm) PCMCIA card
Maximum Transfer Rate: 700 KB/sec
Power Requirements: 5V @ 20mA
Connector: Standard DSUB-25 connector via a pigtail cable off the Type II PCMCIA Card
Operating Systems Supported: DOS, Windows 3.1x, Windows 95, OS/2

OS2 Warp Certified Your ALT-Text here FCC Class B Certified

Note: The SPP-100 is a 5V PCMCIA card. Some newer laptops no longer support 5V cards. See this FAQ for a list of models known not to provide this support. Note that the SPP-100 is currently being redesigned for 3.3V operation. (This information has been posted on June 6, 2005)

Ordering Information

When placing your order, please refer to the following product numbers:

SPP-100 - Parallel Port/Enhanced Parallel Port PCMCIA card
CP-SPP - Spare cable for SPP-100
 

Return to top of page
 USA Office: Tel: 1-877-902-2979    Fax: 1-877-FAX-IECI     Pacific  Time Zone    
                   Tel:1-425-223-4311    Fax: 1-425-223-4303     Pacific Time Zone
P.O. Box 1280. Street Address: 145 Tyee Drive, Point Roberts, WA 98281

Sales inquiries to:  sales at interworldusa.com  Support & Service: support at interworldusa.com

Western Canada: - Vancouver, B.C. Tel: 1-(604) 925-6150    Fax: 1-(604) 925-6170 Toll Free:1-(800) 663-6001
    2454 Haywood Ave, West Vancouver, B.C. V7V 1Y1
  Eastern Canada: - Markham, Ontario Tel: 1-(905) 513-7027    Fax: 1-(905) 513-7029 Toll Free:1-(800) 465-0164
3555 14th Ave, Unit 12, Markham, Ontario L3R 0H5

Sales inquiries to:  sales at interworld.ca    Support & Service: support at interworld.ca

To visit our Australian web site, please click here.