FEATURES
|
|
|
PCMCIA Card Standard
Specification 2.1 compliant |
|
|
Provides monosync,
BISYNC, HDLC, and SDLC synchronous and asynchronous communication
protocols |
|
|
Maximum data rate of
600 Kbps |
|
|
1024-byte data FIFOs
|
|
|
SYNCDRIVE®
software included |
|
|
Configured as DTE
|
|
|
"Hot-swapping"
supported |
|
|
Programmable baud
rate generator |
|
|
RS-232 interface
through shielded DB-25 connector |
Description
Quatech's MPAP-100 is a
PC-Card 2.1 compliant Type-II PCMCIA card which adds a single multi-protocol
serial interface to the host computer. The MPAP-100 provides a standard
RS-232 interface and uses a Zilog 85230 compatible SCC which supports
asynchronous, monosync, BISYNC, HDLC, and SDLC synchronous communication
protocols.
The MPAP-100 provides
software-Selectable 1024-byte data FIFOs for both transmit and receive
operations. With the FIFOs enabled, data can be moved to and from the SCC in
large blocks, providing for high data throughput and low interrupt overhead.
All necessary software is
included to install and configure the card for use with DOS/Windows 3.x, and
OS/2. An .inf file will be suplied for Windows 95 upon request only. In
addition, Quatech's frame level HDLC and BISYNC driver, SYNCDRIVE, is
included free. (SYNCDRIVE is not available for Windows 95.)
Suggested Applications
• High speed synchronous data
communication
• Can be used with T1 and fractional T1 pipelines
• BISYNC, SDLC and HDLC Communication
Specifications
Bus
Interface: PCMCIA Card Standard 2.1
Physical Dimensions: Type II (5 mm) PCMCIA
card
Maximum Data Rate: 600 Kbps
Power Requirements: +5V, 30mA (typ)
Connector: Standard DSUB-25 MALE
connector via a pigtail cable off the Type II PCMCIA Card
Pin 1: Chassis ground
Pin 2: Transmit Data
Pin 3: Receive Data
Pin 4: Request To Send
Pin 5: Clear To Send
Pin 6: Data Set Ready
Pin 7: Signal Ground
Pin 8: Carrier Detect
Pin 9: N/C Pin
Pin 10: N/C Pin
Pin 11: Receive Clock Out
Pin 12: N/C
Pin 13: N/C
Pin 14: N/C
Pin 15: Transmit Clock In Data
Pin 16: N/C
Pin 17: Receive Clock In
Pin 18: Local Loopback
Pin 19: N/C
Pin 20: Data Terminal Ready
Pin 21: Remote Loopback
Pin 22: N/C
Pin 23: N/C
Pin 24: Transmit Clock Out
Pin 25: Test Mode
  FCC
Class B Certified
Ordering Information
When placing your order,
please refer to the following product numbers:
MPAP-100
- RS-232 multi-protocol PCMCIA card
CP-MPAP - Spare cable for MPAP-100
SYNCDRIVE®
Software Included:
Quatech's frame-level HDLC and Bisync driver, SyncDrive, is included for
Windows 95/98/Me and OS/2. For Windows 2000/XP, SyncDrive Plus, a
bit-synchronous SDLC/HDLC driver is also included. Both SyncDrive packages
are not application programs themselves, but provide C callable routines and
C data structures designed to aid users in the development of their own
application software.
OS Supported: Win
95/98/ME/OS2/Win 2000 and XP.
|
