Features
- 2 or 4 independent serial ports
- Each port configurable as RS-422 or
RS-485
- Speeds up to 921.6 kbps
- Full duplex and half duplex modes
supported
- 16750 UARTs with 64-byte FIFOs
- Surge suppression package available
- Windows 95/98/Me/NT/2000/XP & Linux
support
- 5 year warranty
Description
Quatech's RS-422/485 serial boards are
available with either two or four ports. The ports are jumper
configurable for either RS-422 or RS-485 in any combination for full and
half duplex networks. PCI registers are properly implemented to assure
that Plug-and-Play works reliably, and that the board will not cause PCI
bus conflicts. The boards are implemented with 16750 UARTs containing
64-byte FIFOs. They use a clock multiplying feature allowing them to
achieve data rates as high as 921.6 kbps.
To maintain maximum signal integrity,
Quatech uses a four-layer board design. But, for even more protection in
industrial environments, an optional surge suppression package is
available. This "IND" option applies a surge suppressor to each line
that is capable of sustaining up to 40A peak, 8 x 20µs transient surges,
a clamping voltage of 15.5V and a peak energy dissipation of 0.1 Joules.
(Note that implementing the IND option restricts the board's speed to
115.2 kbps.)
|
Home
