Go to the Home Page - IECI Logo

Interworld Electronics

 
and Computer Industries Inc.         
Interworld Electronics Home Page
 Home   Data Acquistion   Advantech   Digital IO Cards  PCL-722
Remote Data Acquisition & Control (ADAM
Digital I/O Cards
PC-Based Industrial Workstations
Industrial PC Chassis
Industrial Communication Cards (ICOM)
Download Utility Software
Software
PCL-722

 pcl-722 image

144-bit Digital I/O Card  


 

Introduction
Applications
Features
Specifications
Ordering Information

Introduction Return to top of page

The PCL-722 is a full-size PC add-on card that offers 144 programmable digital I/O lines divided into six main ports. Each port emulates the operation of an 8255 Programmable Peripheral Interface (PPI) in mode 0, but provides higher driving capacity than the 8255. Each port in turn consists of three subsidiary 8-bit ports (A, B, C). You can individually configure each of these 8-bit ports by software for input or output.

The PCL-722 provides an additional read-back function which lets you monitor the digital output status by taking readings directly from the output port.

Applications Return to top of page

  • High-density mixed digital I/O
  • Digital I/O control
  • Industrial monitoring and control
  • Interfacing with parallel I/O devices
  • Direct interfacing with Opto-22 compatible I/O module racks

Features Return to top of page

  • 144 digital I/O lines
  • Emulates 8255 PPI mode 0
  • Buffered circuits for higher driving capacity than the 8255 Interrupt handling
  • Output status readback
  • Pin-compatible with Opto-22
  • I/O module racks

Specifications Return to top of page

  • I/O lines: 144 (24 bits x 6 ports)
  • Programming mode: 8255 PPI mode 0
  • Interrupts: Bits 0 and 3 of port C can generate an interrupt to IRQ2, 3, 4, 5, 6 or 7
  • Digital output:
    Port A and Port B
    Logic 0: 0.4 V max. @ 12 mA (sink)
    Logic 1: 2.4 V min. @ 800 mA (source)
    Port C
    Logic 0: 0.5 V max. @ 24 mA (sink)
    Logic 1: 2.0 V min. @ 15 mA (source) Digital input:
    Logic 0: 0.8 V max.
    Logic 1: 2.0 V min.
    Transfer rate:
    300 Kbytes/sec typical
    500 Kbytes/sec max.
  • Connectors:
    Six 50-pin male ribbon-cable connectors. Pin assignments are fully compatible with Opto-22 I/O module racks
  • Dimensions: 13.2" (L) x 3.9" (H) (334mm x 99mm)
  • Power consumption:
    +5 V @ 1.3 A typical , 1.8A max.

Ordering Information Return to top of page

PCL-722

144-bit Digital I/O Card, utility disk and user's manual
PCLD-782B

24/16-channel Opto-isolated Digital Input Board
PCLD-785B

24/16-channel Relay Output Board
PCLS-DLL-DIO $FREE

Window 3.1 DLL Driver
Put Links and images as needed here

Return to top of page


 USA Office: Tel: 1-877-902-2979    Fax: 1-877-FAX-IECI     Pacific  Time Zone    
                   Tel:1-425-223-4311    Fax: 1-425-223-4303     Pacific Time Zone
P.O. Box 1280. Street Address: 145 Tyee Drive, Point Roberts, WA 98281

Sales inquiries to:  sales at interworldusa.com  Support & Service: support at interworldusa.com

Western Canada: - Vancouver, B.C. Tel: 1-(604) 925-6150    Fax: 1-(604) 925-6170 Toll Free:1-(800) 663-6001

    2454 Haywood Ave, West Vancouver, B.C. V7V 1Y1
  Eastern Canada: - Markham, Ontario Tel: 1-(905) 513-7027    Fax: 1-(905) 513-7029 Toll Free:1-(800) 465-0164
3555 14th Ave, Unit 12, Markham, Ontario L3R 0H5

Sales inquiries to:  sales at interworld.ca    Support & Service: support at interworld.ca

To visit our Australian web site, please click here.