 |
 |
|
| IPC-614 |
 |
Industrial Rackmount Chassis |
|
|
Introduction Applications Features Specifications Ordering Information
Introduction 
The IPC-614 is a PC/AT compatible computer chassis designed for industrial applications. Its rugged, all steel case holds a 14-slot, PC-compatible passive backplane. This provides simpler troubleshooting, easier upgrading and more efficient packaging. The IPC-614 features shock-absorbers, and a dual-fan cooling system. These ensure the IPC-614 can withstand shock, vibration, dust and extreme operating temperatures found in harsh industrial environments.
Applications 
- Telecommunication receiver
- Heavy-duty network server
- Industrial PC controller on the factory floor
Features
- 19 " rack mount chassis
- Available with 14 ISA-bus slots, PCI backplane, or motherboard; supports dual segmented systems
- Removable disk drive bay that holds up to three front accessible half-height disk drives and one 3.5" HDD
- Disk drive bay mounted with shock-absorbing rubber cushion
- Two high-speed cooling fans on front panel, with field removable air filter to bring clean air into the chassis
- Push-pull air flow design to generate positive air pressure in the chassis for dust and dirt exclusion
- Rubber-buffered card hold-down clamp to protect plug-in cards from vibration
- 250-watt power supply (350-watt option is available)
Dual System Support (Optional)
The IPC-614 can fully support dual subsystems in one chassis. IPC-614D, the dual-system version of the IPC-614, is equipped with a 8-6 segmented passive backplane (PCA-6114D). In addition, there are two individual system control/status panels for each system, including keyboard connectors, reset switches and LED indicators for HDDs.
Specifications 
General Specifications
- Construction: Heavy-duty steel chassis
- Disk drive capacity: Up to three half-height removable disk drives and one fixed 3.5" HDD
- Cooling system: Two 86 CFM cooling fans (flow in) on front panel
- Dimensions: 19” (W) x 7” (H) x 17.6” (D) Net Weight: 44 lbs.
- Air filter: Front panel, removable
- Hold-down clamp: Flexible rubber cushions fix plug-in cards in place
- Control panel indicators: LEDs for power ON/OFF, HDD
- Control panel switches: Two system reset buttons
- Speaker: Internal 8 Ohm speaker
- Keyboard connector: Two pre-wired 5-pin DIN connectors on front panel
- Power supply:
Maximum output: 250 watts at 32o to 122oF (0o to 50oC) Output voltage: 5V@ 25A, 12V @ 10A, -5V @ 0.3A, -12V @ 0.3A Input voltage: 90 to 132VAC or 180 to 264VAC (switchable)
- Safety: UL, CSA and TUV approved
- EMI: Meets FCC and BZT Class A
- MTBF: 50,000 hours at 70% load and 77oF
Environmental Specifications
- Operating temperature: 32o to 122oF (0 to 50oC)
- Relative humidity: 10% to 95%
- Vibration (operating): 5 to 17 Hz, 0.1" double amplitude displacement;
17 to 500 Hz, 1.5B acceleration peak to peak
- Shock (operating): 10 G acceleration peak (11 msec. duration)
- Safety: Meets UL/CSA/TUV
- EMI: Meets FCC and BZT Class A
Ordering Information 
- IPC-614/250
- 19"R/M, 14-slot with 250W UP PS, PCA-6114, with Logo
- IPC-614/350
- 19"R/M, 14-slot with 350W UP PS, PCA-6114, with Logo
|
|
|
|
|
 |